Apparatus Duration; Training; Servicing; Spare Parts And Accessories - Scott Contour User Instructions

CONTOUR
An airline flow tester is available from
Scott Health and Safety Limited under
Article Number 1035978.
Compressed air airlines
Contour must be SCOTT products,
approved to EN 139 or AS/NZS1716 :
2003.
Ensure that hoses used in an explosive or
flammable atmosphere
ANTI-STATIC
EN 139
AS/NZS1716
BREATHING AIR
Cost effective PVC hoses may be used in
other atmospheres.
Scott Health and
manufacture a range of anti-static and
PVC hoses, in lengths ranging from 15m
to 60m. Our Customer
Department will be pleased to provide
details on price and delivery.
1.4

APPARATUS DURATION

All durations quoted are nominal, based
on an Average Wearer Consumption
Rate of 40 L/min and FULLY CHARGED
cylinders. Actual Wearer Consumption
rates vary due to many factors, such as:
•
Workload: high work rates increase
consumption rates.
•
Weight of apparatus and use of
heavy or restrictive clothing.
•
Work environments with extremes
of heat or cold.
•
Physical fitness of the wearer.
•
Other factors include emotional
stress and fatigue.
•
Supplying cylinder
resuscitator or rescue second mask
(RSM).
It is important that all wearers are aware
of these factors and take account of them
when assessing cylinder duration.
used with
are marked:
Safety Limited
Services
air to a
1.5

TRAINING

Personnel who
compressed air breathing apparatus must
be fully trained in accordance with these
instructions and national regulations.
These instructions cannot replace an
accredited training course run by fully
qualified instructors in the proper and
safe use of SCOTT breathing apparatus.
Please contact Training and Technical
Support Services or your distributor for
training course details.
1.6

SERVICING

Contour must be serviced at scheduled
intervals by
completed a formal training course and
hold a current certificate for the servicing
and repair
apparatus. Details
schedule are contained in the SCOTT
Contour Service Manual, copies of which
can only be obtained by registered
holders of a current certificate.
Your distributor
Technical Support Services will be
pleased to provide training course details
and quotes for service contracts. Please
see above for contact details.
1.7 SPARE PARTS AND
ACCESSORIES
Customer Services provide an efficient,
friendly, customer
ordering new apparatus, spare parts and
accessories. The team can also provide
general information on SCOTT products.
2
use self-contained,
personnel who
of SCOTT breathing
of the servicing
or Training
contact point
have
and
for