Headlamps - adjusting headlamp
pattern
If the car is equipped with active Xenon head-
lamps and has the Active main beam function
then the headlamp pattern must be reset when
changing from right to left-hand traffic, and vice
versa.
Active Xenon headlamps*
No adjustment of the headlamp pattern is neces-
sary for cars without the Active main beam* func-
tion. The headlamp pattern is designed in such a
way that oncoming traffic is not dazzled.
Adjustment of the headlamp pattern is required
for cars with Active main beam. The car must be
stationary with the engine running when the
headlamp pattern is shifted between right and
left-hand traffic.
The headlamp pattern is changed in the menu
system MY CAR, see MY CAR (p. 118).
Halogen headlamps
No adjustment of the headlamp pattern is neces-
sary. The headlamp pattern is designed in such a
way that oncoming traffic is not dazzled.
Rear fog lamp
When visibility is reduced by fog the rear fog
lamp can be used so that other road users can
detect the vehicle in front at an early stage.
Button for rear fog lamp.
The rear fog lamp can only be switched on when
key position II is active or the engine is running
and the headlamp control's knob is in position
or
.
Press the button for On/Off. The indicator sym-
bol
in the combined instrument panel and
the light in the button both illuminate when the
rear fog lamp is switched on.
The rear fog lamp is switched off automatically
when the START/STOP ENGINE button is
depressed or when the headlamp control's knob
is turned to position
or
NOTE
Regulations on the use of rear fog lamps vary
from country to country.
Related information
•
Light switches (p. 92)
.
* Option/accessory, for more information, see Introduction.
INSTRUMENTS AND CONTROLS
99
Need help?
Do you have a question about the XC60 and is the answer not in the manual?