Brother PT-9600 Advanced Functons page 26

Function
LEFT (default), CENTRE, RIGHT,
H. ALIGN
(Text alignment
(For samples of the available settings,
function)
refer to the User's Guide.)
ROTATE
(Text rotation (For details on the available settings,
function) refer to the User's Guide.)
MIRROR
(Mirror printing (For details on the available settings,
function) refer to the User's Guide.)
3 Press m or g until the desired setting is
displayed.
NOTE
To return the function to its default setting, press
the space bar.
To quit without changing any settings, press
e(OR hold down dand press 1).
4 Repeat steps 2 and 3 until all functions
are set as you wish.
5 Press n to apply the settings.
With the ESC/P Interface mode, various key-
board commands can be used to control the
operation of the PT-9600. All commands other
than those listed below are ignored.
Control code
CR
Interpreted as a "Return" or "Print
LF
when data reaches the number of
(CR + LF)
lines of the LINES OF TEXT setting"
(LF + CR)
FF Print start.
ESC 0
ESC 2
Line spacing commands.*
ESC 3
ESC A
ESC $ Absolute location control*
ESC \ Relative location control*
ESC @ Printer initialization.
ESC K
ESC L Bit Image data commands.
ESC Y Please refer to "Bit Image Corre-
ESC Z spondences" below.
ESC *
SEC J Perform n/180 inch Line Feed
Master Select
ESC !
Bold, Italic, underline only.
SEC E Bold on
SEC F Bold off
Settings
JUSTIFY
OFF (default), ON
OFF (default), ON
Command
Ch. 2 Advanced Functions
Control code
SEC G Bold on
SEC H Bold off
SEC – Underline on/off
SEC 4 Italic on
SEC 5 Italic off
ESC i Bar Code
CAN Clear all text
DEL Backspace
NOTE
Other ESCAPE sequences are ignored.
* Only applicable when bit image data exists.
BIT IMAGE correspondences
BIT IMAGE HORIZONTAL
8DOTS STD
8DOTS Wdpi
8DOTS
Wdpi Wspeed
8DOTS 4times DPI
8DOTS
CRT GRAPHICS
8DOTS
CRT GRAPHICS II
24DOTS STD
24DOTS Wdpi
24DOTS
CRT GRAPHICS II
24DOTS 3times DPI
24DOTS 6times DPI
As for the Bar Code printing, P-touch 9600 has a
subset of BROTHER 4318 DOT MATRIX
PRINTER BARCODE CONTROL PROTOCOL.
Please contact BROTHER LOCAL OFFICES FOR
MORE DETAILED INFORMATION.
Command
VERTICAL
DPI DPI
60 60
120 60
120 60
240 60
80 60
90 60
60 180
120 180
90 180
180 180
360 180
21