How To Install Features - GEAppliances GSE25ETHBB Owner's Manual

How to install features.

TOP FREEZER SHELF
Make sure the shelf front locks into
position.
Top Freezer Shelf
FREEZER DOOR SHELF FRONTS
Make sure that the shelf front locks
into position.
NOTE: On dispenser models, the
longer shelf fronts go in the top
two positions.
To remove: Lift the shelf extender
straight up, then pull out.
To replace: Engage the shelf
extender in the molded supports
of the door and push in. It will lock
in place.
About the shelves and bins.
Rearranging the Shelves
Refrigerator Shelves:
To Remove
Tilt up
Lift up and out
4
(Not all features are on all models.)
FILTER CARTRIDGE
Remove Bypass Plug
Door Shelf
Front
Door
Shelf
LOWER FIXED DOOR BINS
Make sure the bin fronts lock into position.
Lower Door Bin
To Replace
Insert
top hook
Lower to
lock in
place
Install Filter Cartridge
(Not all features are on all models.)
Freezer Pan:
To Remove
Remove the pan by pulling it
forward, lifting up the front and
sliding it past the stop location.
DAIRY COVER
BOTTLE RETAINER
ADJUSTABLE DOOR BINS
DOOR BIN SNUGGERS
To remove: Lift the
front of the bin up,
then pull out.
To replace or relocate:
Engage the bin in the
molded supports of
the door, and push in.
Bin will lock in place.
Freezer Shelves:
To Remove