Disconnecting a Paired Device
Disconnecting a paired device breaks the connection
between the device and your camera, but retains the
knowledge of the pairing. At a later point when you wish to
reconnect the device, there is no need to setup the
connection information again.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, touch the previously
paired device (from the bottom of the page).
3. At the Disconnect? prompt, touch OK to confirm
disconnection.
Note: Disconnections are manually done but often occur
automatically if the paired device goes out of range of
your camera or it is powered off.
138
Deleting a Paired Device (Unpair)
Deleting a device from your list removes its "connection
record" and upon reconnection would require that you re-
enter all the previous pairing information.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, touch
previously paired device. This opens the connected
device's menu options.
3. Touch Unpair to delete the paired device.
4. Touch Rename to change the name of the paired
device.
5. Touch Call audio to enable or disable call audio from
the paired device.
next to the