Plug And Play Capability - Dell E198WFP User Manual

15-pin D-Sub connector
Pin Number Monitor Side of the 15-pin Side Signal Cable
1 Video-Red
2 Video-Green
3 Video-Blue
4 GND
5 Self-test
6 GND-R
7 GND-G
8 GND-B
9 DDC +5V
10 GND-sync
11 GND
12 DDC data
13 H-sync
14 V-sync
15 DDC clock
24-pin Digital-only DVI Connector
Note: Pin 1 is at the top right.
Pin Signal Assignment Pin Signal Assignment
1 T.M.D.S. Data 2- 9
2 T.M.D.S. Data 2+ 10 T.M.D.S. Data 1+
3 T.M.D.S. Data 2 Shield 11 T.M.D.S. Data 1 Shield 19 T.M.D.S. Data 0 Shield
4 No Pin 12 No Pin
5 No Pin 13 No Pin
6 DDC Clock 14 +5V Power
7 DDC Data 15 Ground (for +5V)
8 No Connect 16 Hot Plug Detect

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID)
using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select
different settings if required.
Pin Signal Assignment
T.M.D.S. Data 1- 17 T.M.D.S. Data 0-
18 T.M.D.S. Data 0+
20 No Pin
21 No Pin
22 T.M.D.S. Clock Shield
23 T.M.D.S. Clock +
24 T.M.D.S. Clock -