Adjusting The Headlight Beams - Yamaha Phazer PZ50Y Owner's Manual

Periodic maintenance and adjustment
PZ50 / PZ50RT / PZ50GT / PZ50MT
1. Headlight coupler
2. Bulb holder cover
PZ50VT
1. Headlight coupler
2. Bulb holder cover
4. Unhook the bulb holder by pushing it in,
then downward.
1. Bulb holder
5. Remove the bulb.
6. Install the new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
72
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thor-
oughly clean it with a cloth moistened
with alcohol or lacquer thinner.
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
7. Install the bulb holder cover, and then
connect the headlight coupler.
8. Install the top cover (PZ50 / PZ50RT /
PZ50GT / PZ50MT) or close the shroud
(PZ50VT).
ESU12280

Adjusting the headlight beams

Turn the headlight beam adjusting screws in
or out to adjust the headlight beams. The
headlight beams move as follows depending
on the turning direction of the headlight beam
adjusting screws.
Direction (a): Down and to the left
G
Direction (b): Up and to the right
G
Direction (c): Down and to the right
G
Direction (d): Up and to the left
G
[ECS00621]