Adjusting Lcd Monitor/ Viewfinder; How To Use The Touch Screen; Viewfinder Adjustment - Panasonic HDC-SDT750 Operating Instructions Manual

Preparation
5
Setup
How to use the touch
screen
You can operate by directly touching the
LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplied)
for detailed operation or if it is hard to
operate with your fingers.
∫ Touch
Touch and release the touch screen to select
icon or picture.
≥ Touch the centre of the icon.
≥ Touching the touch screen will not operate
while you are touching another part of the
touch screen.
∫ Drag
Move your finger while pressing on the touch
screen. Can be used during direct playback
and playback zoom.
20
VQT3B29 (ENG)
Adjusting LCD monitor/
viewfinder
∫ About the operation icons
/
These icons are used to switch the menu
and thumbnail display page, for item
selection and setting etc.
:
Touch to return to the previous screen
such as when setting menus.
≥ Do not touch the LCD monitor with hard
pointed tips, such as ball point pens.
≥ Perform the touch screen calibration when
the touch is not recognised or wrong
location is recognised.

Viewfinder adjustment

∫ Adjusting the field of view
It adjusts the field of view to show the
images on the viewfinder clearly.
Adjust the focus by rotating the
eyepiece corrector dial.
≥ Extend the viewfinder and close the LCD
monitor to turn on the viewfinder.
/ / :