Functions Not Available During 3D Recording - Panasonic HDC-SDT750 Operating Instructions Manual

Hide thumbs Also See for HDC-SDT750:

Workshop manual (176 pages)

Operating instructions manual (163 pages)

Brochure & specs (4 pages)

Table Of Contents

Table of Contents

≥ Use of a tripod is recommended for recording with a stable picture.

≥ The reception range for the remote control might become narrow at the upper side of the

unit, so operate from the lower side.

≥ You will hear a sound when the unit is moved rapidly with the 3D Conversion Lens

attached, but this is not a malfunction.

≥ When the adjustment dial is rotated too much, you will hear a "clapping" sound and the

adjustment screen will stop moving. In such a case, rotate the adjustment dial in the

opposite direction until the adjustment screen starts moving.

≥ [ECONOMY] will not work while you adjust the 3D Conversion Lens attachment position.

≥ When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOW

SHTR (3D)]. The default setting of [AUTO SLOW SHTR (3D)] is [ON].

≥ While 3D recording if moving the unit fast, the message is more likely to appear.

∫ Removing the 3D Conversion Lens

Rotate the attachment screw to UNLOCK to loosen

and then remove.

≥ Place the unit on a stable location such as a table,

and be careful not to drop the 3D Conversion

Lens.

≥ Be careful not to lose the lens cap.

≥ When storing, always fit the lens caps to avoid scratching the protective glass.

∫ Functions that cannot be used during 3D recording

When recording with the 3D Conversion Lens, you cannot use certain functions.