Pioneer DVR-SK12D Operating Instructions Manual page 10

INTERFACE
1 Power Indicator
Lights when the unit is on.
Lights green when a USB 1.1 connection
is used.
Lights blue when a USB 2.0 connection is
used.
Lights orange when an IEEE1394
connection is used.
2 Power Switch
Use to turn power ON/AUTO/OFF.
When set to AUTO, the component turns
on automatically in linkage with the ON/
OFF of the computer.
3 Disc Tray
To open the tray, either press the eject
button, or execute the appropriate
computer command. The tray may be
closed by pressing its front edge in until it
stops.
Do not attempt to pull out the disc tray
forcibly.
4 Busy Indicator
Lights during read/write operations.
10
En
5 Eject Button
Press to open the disc tray.
6 Forced Ejection Hole
Insert a stiff rod into the hole and push to
eject the tray when the tray doesn't unload
by pressing the Eject button. In the normal
operation, the eject button should be used
to unload the tray.
Make sure the power of the drive is
turned off and wait more than one
minute till the disc rotation is stopped
when access the eject hole.
7 USB 2.0 Connector
Type mini-B USB connector. Connects USB
2.0 I/O connector.
8 IEEE 1394 Connector
Connects 4-pin IEEE 1394.a I/O connector.
9 DC IN
Connects supplied AC adapter.
Use only supplied AC adapter.