Ac Adapter Connection; Usb Cable Connection - Pioneer DVR-SK12D Operating Instructions Manual

CONNECTIONS
Connect the unit to the supplied AC adapter and connect the USB or IEEE 1394 cable.

AC adapter connection

Connect the AC adapter plug to the DC IN connector on the rear panel of the unit and
use the power cord to connect the AC adapter to a wall outlet.
Do not use other than the supplied AC adapter.
Connect to wall
outlet.

USB Cable Connection

This is a hot plug unit.
1. Turn on the unit.
2. Turn on the computer and start up Windows.
3. Connect the USB connector on the rear of the unit to the computer using the
supplied USB cable.
÷ Purchase a USB 2.0 board for computers without such a port. (Although connection
to a USB 1.1 port is possible, the unit will then not yield specified optimum
performance.)
Turn on the unit before connecting it to the computer.
Be sure not to disconnect it during data transfers.
Computer
Note: Do not connect the unit using both the IEEE 1394 cable and the USB cable.
12
En
Power cord
USB cable (supplied)
AC adapter (supplied)