604
5-6. Using the hands-free phone system (for cellular phone)
Reconnecting to the Bluetooth
■
If the system cannot connect due to poor signal strength with the engine switch in
ACCESSORY or IGNITION ON mode, the system will automatically attempt to
reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this case, it must
be connected manually, or the phone must be re-selected or re-entered.
Connecting the phone while Bluetooth
■
®
Bluetooth
●
It may take time to connect.
●
Connecting the phone while another Bluetooth
■
When another Bluetooth
will be displayed. To disconnect the Bluetooth
Connecting the phone while 5 Bluetooth
■
When 5 Bluetooth
needs to be deleted. Select "Yes" to delete one or more.
Select the device to be deleted, then select "Remove", and "Yes".
If the Bluetooth
■
When the Bluetooth
audio function will be registered automatically at the same time and confirmation
message may be displayed. If this screen is displayed, select "Yes" to connect the
audio function or select "No" to cancel the connection.
LS460/LS460L_U (OM50D48U)
®
phone
audio will stop temporarily.
®
device is currently connected, a confirmation message
®
devices have already been registered, a registered device
®
phone has a Bluetooth
®
phone to be registered has a Bluetooth
®
audio is playing
®
device is connected
®
device, select "Yes".
®
devices have already been registered
®
audio function
®
audio function, this