Setting the vehicle speed (vehicle-to-vehicle distance control
mode)
Press the "ON•OFF" button to
1
activate the cruise control.
Radar cruise control indicator will
come on and a message will be shown
on the multi-information display.
Press the button again to deactivate
the cruise control.
Accelerate or decelerate the
2
vehicle to the desired speed, and
push the lever down to set the
speed.
"SET" indicator will be displayed.
The vehicle speed at the moment the
lever is released becomes the set
speed.
While the vehicle is in vehicle-to-vehi-
cle distance control mode, if the lever
is released when vehicle speed is less
than 30 mph (50 km/h) and a vehicle
ahead can be detected, the vehicle
will start following the vehicle ahead at
a set speed of 30 mph (50 km/h).
LS460/LS460L_U (OM50D48U)
4-5. Using the driving support systems
249
4