About Condensation; Operating Instructions - Panasonic HC-X1000 Basic Operating Instructions Manual

∫ About Condensation

(When the lens, the viewfinder
or LCD Monitor is fogged up)
Condensation occurs when there is a change in
temperature or humidity, such as when the unit
is taken from outside or a cold room to a warm
room. Please be careful, as it may cause the
lens, the viewfinder or LCD monitor to become
soiled, moldy, or damaged.
When taking the unit to a place which has a
different temperature, if the unit is accustomed
to the room temperature of the destination for
about one hour, condensation can be
prevented. (When the difference in temperature
is severe, place the unit in a plastic bag or the
like, remove air from the bag, and seal the bag.)
When condensation has occurred, remove the
battery and/or the AC adapter and leave the
unit like that for about one hour. When the unit
becomes accustomed to the surrounding
temperature, fogginess will disappear naturally.
∫ About security
Be careful about the possibility of theft or loss of
the unit, and be careful not to leave the unit
unattended. Please note that Panasonic does
not accept any responsibility for the
compromise, manipulation, and loss of
information caused by these events.
∫ Caution regarding laser beams
The lens may suffer damage if struck by a laser
beam. Make sure that laser beams do not strike
the lens when shooting in an environment
where laser devices are used.
∫ Installing HD Writer XE 2.0
Check the website below to download/install the software.
http://panasonic.jp/support/global/cs/soft/download/f_xe20.html
6
SQT0478
∫ Cards that you can use with
this unit
SDHC Memory Card and SDXC Memory
Card
≥ 4 GB or more Memory Cards that do not have
the SDHC logo or 48 GB or more Memory
Cards that do not have the SDXC logo are
not based on SD Memory Card
Specifications.
≥ Refer to page 19 for more details on SD
cards.
∫ For the purposes of these

operating instructions

≥ The battery pack is referred to as the
"Battery".
≥ SDHC Memory Card and SDXC Memory
Card are referred to as the "SD card".
≥ The smartphone and tablet are indicated as
"smartphone".
≥ Function that can be used for Recording
Mode:
Function that can be used for Playback
Mode:
≥ Scene(s) recorded with [REC MODE] set to
[MOV (LPCM)], [MP4 (LPCM)] or [MP4]:
"MOV/MP4 scene(s)".
≥ Scene(s) recorded with [REC MODE] set to
[AVCHD]: "AVCHD scene(s)".
≥ The correct value for 60p/60i/30p/24p is
59.94p/59.94i/29.97p/23.98p (except C4K).
≥ Pages for reference are indicated by an
arrow, for example: l 00