Powering Your Phone On/Off - Zte Compel User Manual

Charging the Battery
Note: For best performance, charge the battery fully prior to
using the phone for the first time.
Insert the charger's connector into the
charging port. Be sure to insert the
connector in the correct orientation.
Do not force the connector into the port.
Plug the charger into a standard
AC wall outlet.
When the battery is fully charged, unplug the charger and
disconnect it from the phone.

Powering Your Phone On/Off

Make sure the micro-SIM card is in your phone and the battery is
charged.
• Press and hold the Power Key to power on your phone.
• To turn it off, press and hold the Power Key to open the
options menu. Tap Power off OK.
Setting Up Your Phone for the First Time
When you first power on your phone after you purchase it or
reset it to factory settings (see Phone Settings – Factory Reset),
you need to set up your phone settings before using it.
Tap the language field to select the language you want to use
and then tap .
2
Switching to Sleep Mode
To save battery power, Sleep Mode suspends your phone in
a low-power-consumption state while the display is off. Your
phone also goes into Sleep Mode by itself when the display is
automatically turned off after a certain period of time, which you
can set by pressing
from the home screen.
Press the Power Key to switch to Sleep Mode.
Waking Up Your Phone
Note: If you have set an unlock pattern, PIN, or password for
your phone (see Phone Settings – Security) you'll need to draw
the pattern or enter the PIN/password to unlock your screen.
Getting Started Getting Started
If prompted, follow on-screen instructions to connect to a
Wi-Fi network.
Configure the Google location options and tap .
You will be prompted to accept the terms of Google service.
Tap to complete setup.
System settings Display Sleep
Press the Power Key to activate your screen display.
Tap and hold the screen to unlock the screen.
3