Adjusting The Temperatures And Display - LG LFXS24623 SERIES Owner's Manual

ADJUSTING THE TEMPERATURES AND
DISPLAY
Adjust Freezer Temperature
To adjust the temperature in the freezer compartment,
press the FREEZER button to cycle through the the
range of available settings.
Adjust Refrigerator Temperature
To adjust the temperature in the refrigerator
compartment, press the REFRIGERATOR button to
cycle through the range of available settings.
NOTE: The actual inner temperature varies depending
on the food status, since the indicated temperature
setting is the target temperature and not the actual
temperature within the refrigerator.
Initially set the REFRIGERATOR CONTROL at 37 °F
(3°C) and the FREEZER CONTROL at 0°F (-18°C).
Leave them at these setting for 24 hours (one day) to
stabilize. Then adjust the compartment temperature as
illustrated above.
**
TEMPERATURE DISPLAY
To change the temperature display from Fahrenheit
to Celsius:
Simultaneously press and hold the FREEZER and
REFRIGERATOR buttons for more than 5 seconds.
Do the same to convert back to Fahrenheit.
USING YOUR REFRIGERATOR
POWER SAVING MODE (in some models)
The display will remain off until the next time the door
is opened.
The display will also turn on when any button is
pressed, and it will remain on for 20 seconds after
the last door opening or button selection.
To deactivate the Power-Saving Mode, press the
FREEZER and ICE PLUS/ENERGY SAVING or ICE
PLUS buttons simultaneously and hold them for 5
seconds until the tone sounds.
NOTE: Power Saving Mode function is set on the
product. Power Saving Mode is allways active in Models
without energy Saving Mode.
CAUTION WHEN CLOSING THE DOOR
To reduce the risk of door scratches, please make sure
that the refrigerator door mullion is always folded in.
If dew gathers on the refrigerator door mullion at any
point, deactivate the Energy Saving mode until the
issue resolves itself.
18
or
CAUTION
.