Download Print this page

Klipsch KHO-7 Manual page 2

Advertisement

PLACEMENT
There are a number of applications where the Klipsch
KHO-7 is the perfect solution for outdoor sound
– patios, decks, swimming pools, porches or any
other place where exposure to the elements makes
conventional loudspeaker usage unacceptable.
Many of the placement recommendations for indoor
use also apply in outdoor applications. The most
common difference is the desire or need to mount
the speakers above ear level on a wall or under an
overhang. To achieve the best performance from your
KHO-7, place both speakers on the same wall facing
the listening area and space them 6-15 feet apart. For
a higher quality stereo image, angle down, or toe-in
the speakers toward the primary listening area. This
is especially important in installations that place the
speaker well above ear level. Some additional bass will
result if you place the speakers in a corner or near a
wall: This provides greater bass coupling due to the
additional reflected energy from the walls.
WALL MOUNTING
Included with your KHO-7 speakers are "C"-style
mounting brackets that provide tremendous placement
flexibility. Constructed of weather-resistant powder-
coated aluminum to ensure years of reliable service,
these brackets are the reconmmended method of
mounting and supporting your speakers. The bracket
is attached to the speaker with the supplied low profile
knobs, which thread into the top and bottom of the
cabinet. This allows the speaker to be angled to the left
or right when mounted vertically, or up and down when
mounted horizontally.
After determining the desired location and orientation
of your KHO-7, remove the bracket from the loudspeaker
and use it as a template to mark the location of the
mounting holes. Check the alignment of the holes with
a torpedo level before drilling the properly sized pilot
hole at the marked locations. Use #10-12, 2.5-3" long pan
head screws to attach the bracket into a wall stud. Affix
the speaker to the bracket with the supplied knobs. Be
sure to leave enough clearance between the end of the
bracket and any adjacent wall or ceiling for installation
of the knobs.
If a wall stud if not available, use the appropriate type
of drywall or masonry anchor to support the weight
of the speaker, allowing for a generous safety margin.
Please consult your dealer, custom installer or building
contractor in these situations.
USE OF THE PORT PLUG
A vinyl port plug is included for installations that may
expose the KHO-7 to extremely wet weather conditions.
The internal components are water-resistant, however, it
is best to avoid having standing water inside the cabinet
whenever possible. To insert the plug, gently pry off the
metal grille taking care not to bend it or chip the paint.
Insert the closed end of the plug into the port until the
fit is snug. DO NOT use excessive force! Use of the port
plug will result in a slight loss in the bass frequencies,
but will make your speakers more weather-resistant and
ensure a long and trouble-free life.

Advertisement

loading