Chevrolet equinox 2017 Owner's Manual page 179

Hide thumbs Also See for equinox 2017:
Table of Contents

Advertisement

178
Driving and Operating
If equipped with the StabiliTrak
system, the system may begin to
limit wheel spin while you are using
cruise control. If this happens, the
cruise control will automatically
disengage. See Traction Control/
Electronic Stability Control 0 175.
If a collision alert occurs when
cruise control is activated, cruise
control is disengaged. See Forward
Collision Alert (FCA) System 0 183.
When road conditions allow you to
safely use it again, cruise control
can be turned back on.
If the brakes are applied, cruise
control is disengaged.
®
: Press to turn cruise control on
or off.
: Press to disengage cruise
control without erasing the set
speed from memory.
RES/+ : If there is a set speed in
memory, move the thumbwheel up
briefly to resume to that speed or
hold upward to accelerate. If cruise
control is already active, use to
increase vehicle speed.
SET/ : Move the thumbwheel down
briefly to set the speed and activate
cruise control. If cruise control is
already active, use to decrease
speed.
Setting Cruise Control
If the
button is on when not in
use, SET/ or RES/+ could get
bumped and go into cruise when not
desired. Keep
cruise control is not being used.
1. Press
to turn the cruise
system on.
2. Get up to the speed desired.
3. Move the thumbwheel toward
4. Remove foot from the
Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied or
cruise control is disengaged without
erasing the set speed from memory.
Once the vehicle reaches about
40 km/h (25 mph) or more, move the
thumbwheel up toward RES/+
briefly. The vehicle returns to the
previously set speed.
Increasing Speed While Using
Cruise Control
turned off when
If the cruise control system is
already activated:
SET/ and release it. The
desired set speed briefly
appears in the Driver
Information Center (DIC)
display.
accelerator.
is pressed, the
Move the thumbwheel up toward
RES/+ and hold it until the
vehicle accelerates to the
desired speed, then release it.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents