Connection - Panasonic DMR-PWT560 Operating Instructions Manual

Connection

3D programmes or 4K images can be played back when this unit is connected to a 3D or 4K
compatible terminal of a 3D or 4K compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
• Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic's HDMI cable.
When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.
• When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of
power, even when the unit is in standby mode. (
Basic connections
To the aerial
RF coaxial cable
(supplied)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
Household mains socket
(AC 220 to 240 V, 50 Hz)
• Keep the RF coaxial cables as far away as possible from other cables.
Aerial cable
77)
HDMI cable
VHF/UHF
HDMI
RF IN
This unit's rear panel
9
SQT1112