Pride Jet3 Ultra Owner's Manual page 27

Table of Contents

Advertisement

V I .
C O M F O R T
To rotate the ELRs:
1. Push in release lever A. See figure 20.
2. Rotate the ELRs.
To adjust the ELR angle:
1. Push down release lever B. See figure 20.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two adjustment screws from the side of each
leg rest extension. See figure 20.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
Anti-Tip Wheels
The anti-tip wheels are designed to give your power chair in-
creased stability on rough surfaces. The anti-tip wheels are pre-
set at the factory for smooth surfaces or indoor use only. If you
plan on using your power chair on rough surfaces, it may be
necessary to adjust the anti-tip wheels to better suit your needs.
The anti-tip wheels may need adjustment if the following occurs:
n When coming to a stop, your power chair tips forward
excessively.
n The anti-tip wheels constantly rub the ground.
WARNING! Consult your authorized Pride Provider before attempting to change the anti-tip wheel
height! Changing the anti-tip wheel height affects handling under acceleration!
WARNING! The higher you raise the anti-tip wheels, the more you increase your power chair’s
tendency to tilt forward while decelerating. You can compensate for this by having your authorized
Pride Provider make a small adjustment to the pre-programmed deceleration setting in the controller
or by moving the seat assembly farther to the back of your power chair.
PROHIBITED! Do not remove the anti-tip wheels.
NOTE: Each drive tire must be inflated to 35 psi (if equipped with pneumatic tires) and the user
must also be seated in the power chair in order to properly adjust the anti-tip wheels.
To adjust the anti-tip wheels:
1. Loosen bolt A. See figure 21.
2. Remove bolt B.
3. Raise or lower the anti-tip wheel. Each hole is 1/2-in. apart.
4. Reinstall bolt B.
5. Tighten bolt A.
6. Raise or lower the other anti-tip wheel so that it is at the same height.
US Jet 3 Ultra/RevC/Jun03
A D J U S T M E N T S
ANTI-TIP WHEEL
Figure 21. Anti-Tip Wheel Assembly
www.pridemobility.com
LEG REST
EXTENSION
Figure 20. Elevating Leg Rests
B
RELEASE LEVER A
RELEASE LEVER B
LEG REST
ADJUSTMENT
SCREWS
A
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents