Table of Contents
Advertisement
Connecting and temperature setting
WARNING: YOU MUST WAIT 48 hours after unpacking and positioning your cabinet before switching
on. After plugging in, load your cabinet step by step.
THE BOTTLES MUST NOT BE IN CONTACT WITH THE BACK OF THE CABINET to maintain air
circulation around the bottles.
YOUR CELLAR TEMPERATURE
Depending on your WINCAVE model, your cabinet is fitted with the smart handle, equipped with one of
the following two electronic regulations (French patent no. 9106156).
Wood Handle
Sticker
Cover for PCB box
Aluminium carter
PCB (Regulato)r
PCB box
Smart Handle Mono T° with the <LED security + >
The ideal temperature for wine storage is between 12°C and 14°C.
The temperature is pre-set and needs no adjustment.
YOU HAVE NOTHING TO DO.
Smart Handle Amphora with display and the <LED security +>
The temperature is adjustable by using the external display.
You can select between 10°C and 16°C.
HOW TO ADJUST THE TEMPERATURE RANGE, AMPHORA MODEL.
When the cabinet is first plugged in, the temperature is pre-set at a fixed 14°C. The display indicates for 3
seconds the set temperature. Then it displays the current internal temperature. Pressing on the < plus >
or < minus > keys will display the set temperature level. After releasing the keys the current interior
temperature is displayed again. Pressing the < plus > or < minus > keys at the same time for 3 seconds will
enable you to reach the programming mode.
For the first 3 seconds the display shows a flashing "P".
After 3 seconds, the display shows the set temperature (flashing). You can adjust the value by pressing the
< plus > or < minus > keys.
After 3 seconds, without pressing any key, the temperature is automatically registered and the current
interior temperature is shown again.
In case of power failure, the set temperature is stored in the programme's memory and will be used as soon
as power is re-established.
- 3 -
Advertisement
Table of Contents
