Table of Contents
Advertisement
Before installing your cabinet read these instructions carefully.
OPERATING CONDITIONS
The WINCAVE cabinet you recently purchased is a maturation cabinet. It is therefore fitted with both cold
and warm circuits. The ideal temperature is 12°C/14°C.
When the temperature inside the cabinet is above the set temperature, the COLD circuit is activated. When
it falls below the set temperature, the WARM circuit automatically starts heating up.
You therefore obtain the programmed temperature.
THE AMBIENT TEMPERATURE RANGE IS FROM 5 to 35°C
The WINCAVE cabinet should not be positioned next to a significant warm source or in a very humid
environment. Make sure that your cabinet is properly levelled. A surrounding air circulation is
recommended, to optimise efficiency.
You need to adjust the front feet to ensure that your cabinet is properly levelled.
The nominal power should be 220V – 50Hv (voltage between 198/242V). You need to have an efficient
earth (15 amp).
1. Internal and external cabinet walls of steel.
Walls are 60 mm thick insulated with polyurethane foam without CFC to a density of 45g/l.
2. Sensor.
3. Magnetic door joint.
4. Shelves (sliding and storage).
5. Transportation wheels (rear) and adjustable feet (front).
6. Rust-proof security lock.
7. Heater (automatic winter function).
8. Upper and lower aeration.
- 2 -
Operating Conditions
INSTALLATION
CABINET DESCRIPTION
1
8
4
7
8
5
3
6
2
Advertisement
Table of Contents
