Table of Contents
Advertisement
Quick Links
- 1 -
Wine Cabinet WINCAVE
User Manual
INDEX
INSTALLATION, 2
Technical specifications
Your temperature
How to adjust your temperature
EQUIPMENT, 4/5
Storage and sliding shelves
Capacity of each cabinet
Temperature Alarm, the < led security plus >
TEST
25, Rue DELAMBRE 75014 PARIS
Tel/Fax :01 42 79 83 34
www.wincave.com
contact@wincave.com
Advertisement
Table of Contents
Summary of Contents for WINCAVE LCV serie
-
Page 1: Table Of Contents
Installation of shelves Capacity of each cabinet CONTROL AND MAINTENANCE, 6 Temperature Alarm, the < led security plus > Carbon Filter Cleaning your Wincave cabinet PROBLEM SOLVING, 7 INSTALLATION OF THE SMART HANDLE, 8 TEST 25, Rue DELAMBRE 75014 PARIS Tel/Fax :01 42 79 83 34 www.wincave.com... -
Page 2: Operating Instructions
THE AMBIENT TEMPERATURE RANGE IS FROM 5 to 35°C INSTALLATION The WINCAVE cabinet should not be positioned next to a significant warm source or in a very humid environment. Make sure that your cabinet is properly levelled. A surrounding air circulation is recommended, to optimise efficiency. -
Page 3: Connection And Temperature Settings
THE BOTTLES MUST NOT BE IN CONTACT WITH THE BACK OF THE CABINET to maintain air circulation around the bottles. YOUR CELLAR TEMPERATURE Depending on your WINCAVE model, your cabinet is fitted with the smart handle, equipped with one of the following two electronic regulations (French patent no. 9106156). Wood Handle... -
Page 4: Equipment
SLIDING AND STORAGE SHELVES WINCAVE offers 2 options to store your wine bottles. A storage shelf for 48 bottles maximum Ref: C/S4s su... - Page 5 - 5 - CAPACITY OF YOUR CABINET MEASURED IN BORDEAUX BOTTLES Your model : Possible capacity: CV 162 Btles CV 150 Btles 138 Btles 126 Btles Your cabinet is equipped with the following accessories: Sliding shelves C/coul su. 12 bordeaux’s bottles maxi Fixes Shelves CS/4s su 48 bordeaux’s bottles maxi Your model :...
-
Page 6: Control And Maintenance
: : : : CLEANING YOUR WINCAVE Twice a year, clean the condenser (metallic grating at the back of the cabinet). The wooden parts, the top and bottom of the door, and the general parts of the cabinet must be cleaned with a soft cloth and water. -
Page 7: Problem Solving
- 7 - Malfunctionning Your problem and its answer are perhaps in the following list: Problem Solution There is a vibration when the Cabinet is not level on the floor. Use the adjustable feet at compressor is working the front of the cabinet. No indication after plugging in. -
Page 8: Installation Of The Smart Handle
- 8 - INSTALLATION OF THE SMART HANDLE Description of parts 1 Control panel stand 2 Screw for fixing the control panel. (pre-screwed on the door ) 3 Screws for fixing on the smart handle 1 Smart handle MONO T° or AMPHORA Neccessary tools : 1 Phillips screwdriver Description of the smart handle...