Wolf ICBCT15G/S Installation Instructions Manual page 11

I N S TA L L AT I O N I N S T R U C T I O N S
I N S TA L L AT I O N O P T I O N S
M U L T I P L E C O O K T O P I N S TA L L A T I O N
If the gas cooktop is to be used with any
combination of additional cooktop units or
modules with a filler strip, the cut-out width is
calculated by adding the corresponding units'
cut-out dimensions plus 32 mm for each addi-
tional unit. Refer to the illustration below.
IMPORT NT NOTE: When multiple units are
installed side by side, each unit must have its
own separate recommended electrical circuit.
When two or more modules are installed
together, an integrated module filler strip
(IFILLER/S) is recommended. Contact your
Wolf dealer for information on these accessory
components.
1518 mm –
1511 mm –
762 mm COOKTOP AND TWO MODULES OR
1276 mm –
914 mm COOKTOP AND ONE MODULE
1130 mm –
THREE MODULES WIDTH OR
1124 mm –
762 mm COOKTOP AND ONE MODULE
743 mm
TWO MODULES WIDTH
356 mm
489 mm
CUT-OUT
CUT-OUT
64 mm WIDTH
DEPTH
min
FRONT OF COUNTERTOP
Countertop cut-out dimensions for installation of multiple cooktops
FOUR MODULES WIDTH OR
O P T I O N A L
I N S TA L L AT I O N S
Dimensions will
vary according to
the specific installa-
tion.
11