Wolf ICBCT15G/S Installation Instructions Manual page 10

W O L F
I N S TA L L AT I O N
The illustrations below provide the overall
dimensions, countertop cut-out and installation
specifications for Model ICBCT36G.
IMPORT NT NOTE: 991 mm wide cabinets are
recommended for installation of Model
ICBCT36G.
Wolf 914 mm built-in oven may be installed
below Model ICBCT36G. For this installation,
unless you are using cabinets deeper than 610
mm, it is recommended that the electrical and
gas supply be placed in the base cabinet to the
right of the oven. Refer to installation instruc-
tions provided with the built-in oven for addi-
tional specifications.
I N S TA L L A T I O N S P E C I F I C A T I O N S – M O D E L I C B C T 3 6 G
914 mm
OVERALL WIDTH
Overall Dimensions
M O D E L I C B C T 3 6 G
D I M E N S I O N S
Overall Width
Overall Height
Overall Depth
Recommended
Cabinet Width
Minimum Cabinet Depth
Minimum Height Clearance 102 mm
Cut-Out Width
Cut-Out Depth
Unit dimensions may vary to ± 3 mm.
10
G A S C O O K TO P S
S P E C I F I C A T I O N S
533 mm
OVERALL
DEPTH
SIDE
CABINET
330 mm
max
102 mm
64
mm*
914 mm
102 mm
533 mm
*Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop.
NOTE: Gas and electrical location applies only to installation with built-in oven.
991 mm
578 mm
889 mm
489 mm
If the Model ICBCT36G is installed above
cabinets, the gas and electrical placement is not
critical. grounded outlet needs to be placed
within 1.2 m of the right rear of the cooktop.
When a 914 mm built-in oven is installed below
Model ICBCT36G, it is recommended that the
rough opening for the oven be 197 mm from
the floor to ease the use of the oven door.
IMPORT NT NOTE: When multiple cooktop
units are installed side by side, refer to the
countertop cut-out dimensions on page 11.
762 mm
COUNTERTOP
TO COMBUSTIBLE
MATERIALS
229 mm
TO
*
COMBUSTIBLE
914 mm
FLOOR TO
COUNTERTOP
min
457 mm
min
229 mm
SEE COUNTERTOP
CUT-OUT BELOW COMBUSTIBLE
102 mm
89 mm G E
254 mm
914 mm OVEN OPENING
889 mm
CUT-OUT WIDTH
489 mm
CUT-OUT
DEPTH
64 mm
FRONT min
COUNTERTOP CUT-OUT
TO
*