Installation - Frigidaire FPRU19F8RF Use & Care Manual

Hide thumbs Also See for FPRU19F8RF:
Table of Contents

Advertisement

Required Tools:
This Use & Care Guide provides general
operating instructions for your model. Use the
refrigerator only as instructed in this Use &
Care Guide. Before starting the refrigerator,
follow these important first steps.
Location
• Choose a place that is near a grounded
electrical outlet. Do Not use an extension
cord or an adapter plug.
• If possible, place the refrigerator out of
direct sunlight and away from the range,
dishwasher or other heat sources.
• The refrigerator must be installed on a
floor that is level and strong enough to
support a fully loaded refrigerator.
CAUTION
DO NOT install the refrigerator where the
temperature will drop below 55°F (13°C) or
rise above 110°F (43°C). The compressor
will not be able to maintain proper
temperatures inside the refrigerator.
DO NOT block the kick plate on the
lower front of your refrigerator. Sufficient
air circulation is essential for the proper
operation of your refrigerator.

Installation

Installation clearances:
• Allow the following clearances for ease
of installation, proper air circulation, and
plumbing and electrical connections:
Sides - ⅜"
Top and Back - 1"
• Allow for trim kit if it is to be installed
with the unit.
NOTE
If your refrigerator is placed with the door
hinge side against a wall, you may have to
allow additional space so the door can be
opened wider.
(10 mm)
INSTALLATION
Refrigerator
⅜"
⅜"
(10 mm)
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents