Orion HP-2300 Owner's Manual page 20

Tri-Mode Six Channel Configuration
Lowest recommended impedance is 2W stereo and 4W bridged mono.
●
Front and rear outputs must be set for full range operation.
●
Passive crossovers must be used on all components and frequencies must not overlap.
●
WARNING! Failure to observe these requirements may result in damage to the amplifier.
+
1CH
© 2005 Directed Electronics, all rights reserved
SPEAKER
BRIDGE
- + -
1CH 2CH 2CH
SPEAKER
BRIDGE
+ - +
3CH 3CH 4CH
-
4CH
19