Advertisement
TOOLS REQUIRED
• Wrench ½" (2)
• Wrench
/
" (2)
9
16
• Wrench
/
" (2)
7
16
PARTS IDENTIFICATION
BAG
CONTAINERS
INSTALL PLATE AND HANGER
1.
Using hardware provided in kit, attach support mount to
unit.
2.
Attach hanger bracket to support mount. Do not fully
tighten nuts at this time.
Hanger Bracket
3.
Secure rear end of support straps to outside of hanger
assembly inserting a spacer between the mower and the
strap. Set reinforcement plates to the outside of the tank
brackets and fasten front end of support strap to tank
• Ft/Lbs Torque Wrench
• Socket and Ratchet
• Standard Screwdriver
COVER ASSEMBLY
DUMP BAG
INDICATOR
UPPER
CHUTE
Support Mount
ASSEMBLY
CONTAINER CONTENTS
• Bagger Assembly
/
"
9
• Upper Chute
16
• Mounting Brackets
NOTE: When the terms RH (right hand) or LH (left hand) are
used, it refers to when the operator is seated on the mower.
bracket and reinforcement plate with round head bolt.
Secure front end of reinforcement plate to tank bracket
with hex bolt. Fully secure all mounting hardware.
Reinforcement
Plate
Spacer
5
•
Cover Assembly
•
Lower Chute
•
Bag of Hardware
LOWER
CHUTE
Support Straps
Advertisement
