Maintenance - Makita 6904VH Instruction Manual

Standard bolt
For 6905H
.
N m
.
(ft lbs)
M20X50
200
(2040)
M16X50
150
(1530)
100
(1020)
M12X50
50
(510)
0 0.5 1
Fastening time
005303
For 6905H
High tensile bolt
.
N m
.
(kg cm)
300
(3060)
250
(2550)
200
(2040)
150
(1530)
M12X50
100
(1020)
50
(510)
0 1 2 3 4
Fastening time
005304
Screwdriving operation
Fig.7
For 6904VH only
When driving screws, install a bit adapter (optional
accessory) on the tool and insert a driver bit (optional
accessory) into the bit adapter.
Hold the tool firmly and place the point of the driver bit in
the screw head. Apply forward pressure to the tool to the
extent that the bit will not slip off the screw. Start the tool
slowly and then increase the speed gradually. Release
the switch trigger just as the screw bottoms out.
NOTE:
Use the proper bit for the head of the screw/bolt
•
that you wish to use.
Hold the tool pointed straight at the screw or the
•
screw and/or bit may be damaged.
M20
M16
M12
1.5
(S)
M16X50
M16
M12
8
7
5 6
(S)
When driving wood screws, predrill pilot holes to
•
make driving easier and to prevent splitting of the
workpiece. The pilot holes should be slightly
smaller than the wood screws in diameter.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.
ACCESSORIES
CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Sockets
•
Extension bar
•
Universal joint
•
Bit adapter (for 6904VH only)
•
Phillips bits (for 6904VH only)
•
Socket bits (for 6904VH only)
•
6
or attachments
Only use accessory or
are