How To Use - Seiko 6R20 Instructions Manual

● Check the type of the crown of your watch
The crown
turns.
Turn the
crown
The crown
clockwise.
does not
turn.
* If your watch has a screw-lock crown, the crown will screw into the watch case
for added protection.
• After completing all settings of the watch, screw the crown in again by turn-
ing it clockwise while pressing it.
• If the crown turns out to be too stiff to be screwed up, turn the crown coun-
terclockwise once and then give another try.
• Do not screw it in by force as it may damage the slots of the crown.
8
The crown of your watch is
*the screw lock type. Go to
"HOW TO
To set the watch
USE"
Unscrew the crown by turning it
counterclockwise.
Unscrew.
Screw up.

HOW TO USE

This watch is an automatic watch equipped with a manual winding mechanism.
• When the watch is worn on the wrist, the motion of the wearer's arm winds the
mainspring of the watch.
• If your watch is completely stopped, it is recommended that you manually
wind the mainspring by turning the crown.
● How to manually wind the mainspring by turning the crown
1. Slowly turn the crown clockwise (the 12 o'clock direction) to wind the
mainspring.
* Turning the crown counterclockwise (the 6 o'clock direction) does not wind the
mainspring.
2. Wind the mainspring until the power reserve indicator shows a full-wound
state. The second hand will start moving.
3. Set the time, day and date before putting your watch on the wrist.
9