Back Panel Function; Remote Control Function - Element ESB204 Instruction Manual

PREPARATIONS FOR START

BACK PANEL FUNCTION

OPTICAL IN :Optical connector for connection from a device such as a home
1
theater system, amplifier, receiver, set top box, or DVD player.
LINE IN: Connect the LINE IN audio from cell phone or other device.
2
AUX IN (ANALOG R): Connect the analog audio from a device such as a TV,
3
set top box, DVD player, or gaming system.
AUX IN (ANALOG L): Connect the analog audio from a device such as a TV,
4
set top box, DVD player, or gaming system.
POWER CONNECTOR: Plug the connector from the AC/DC Power Adapter here.
5

REMOTE CONTROL FUNCTION

BUTTON: Press to turn Sound Bar on or off.
1
NOTE: If the channel has no input signal or any
operation in 15 minutes, the device will automatically
go into the Standby mode.
MUTE: Press to turn the sound on and off.
2
Press the "+" button to increase the volume.
3
Press the "–" button to decrease the volume.
4
Preset the factory settings, the volume is 50%.
5
OPTICAL BUTTON: If the device is not in optical
6
mode, press this button to switch to OPTICAL IN mode.
BLUETOOTH BUTTON: If the device is not in Bluetooth
7
mode, press this button to switch to Bluetooth mode.
AUX IN BUTTON: If the device is not in AUX IN mode,
8
press this button to switch to AUX IN mode.
LINE IN BUTTON: If the device is not in LINE IN mode,
9
press this button to switch to LINE IN mode.
7
1 2 3 4
IN AUX IN
5
1
3
VOL+
PRESET
4
VOL-
6
OPT
8
AUX
LINE
2
5
7
9