Advertisement

ESB204
INSTRUCTION MANUAL
2.0 Sound Bar

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ESB204 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Element ESB204

  • Page 1 ESB204 INSTRUCTION MANUAL 2.0 Sound Bar...
  • Page 2: Table Of Contents

    CONTENTS INFORMATION ON SAFETY PREPARATORY WORK UNPACKING INSTALLATION INSTALLATION STEPS PREPARATIONS FOR START FUNCTION TOP PANEL FUNCTION BACK PANEL FUNCTION REMOTE CONTROL FUNCTION CONNECTION SOUND BAR CONNECTION SPECIFICATIONS TROUBLESHOOTING WARRANTY...
  • Page 3: Information On Safety

    INFORMATION ON SAFETY 1.Read these instructions. These servicing instructions are for use by qualified service person only. To reduce the risk of 2.Keep these instructions. electric shock do not perform any servicing other than that contained in the operating instructions 3.Heed all warnings.
  • Page 4: Information On Safety

    INFORMATION ON SAFETY SERVICE To reduce the risk of electric, do not remove screws. The unit does not contain any user serviceable parts. Please leave all maintenance work to qualified personnel. Do not open any fixed covers as this may expose dangerous voltages. MAINTENANCE Ensure to unplug the unit from the power supply before cleaning.
  • Page 5: Preparatory Work

    PREPARATORY WORK Unpacking Main unit RCA Cable X1 Mains Cable X1 Remote Control X1 Cover X2 Screw X2 Instruction Manual X1...
  • Page 6: Installation

    INSTALLATION STEPS ① Cover ② Screw ③ Sound Bar WALL MOUNTING The Sound Bar can either be kept on the stand or mounted on the wall. If you choose to mount the Sound Bar on the wall, follow the instructions below for removing the stand. 1.
  • Page 7: Preparations For Start

    PREPARATIONS FOR START TOP PANEL FUNCTION TOP PANEL TOP PANEL BUTTONS POWER BUTTON Press to turn Sound Bar on or off. The indicator light is orange in the standby mode, and it will turn off when the system is on. Note: If the channel has no input signal or any operation in 15 minutes, the device will automatically go into the Standby mode.
  • Page 8: Back Panel Function

    PREPARATIONS FOR START BACK PANEL FUNCTION AUX IN OPTICAL IN :Optical connector for connection from a device such as a home theater system, amplifier, receiver, set top box, or DVD player. LINE IN: Connect the LINE IN audio from cell phone or other device. AUX IN (ANALOG R): Connect the analog audio from a device such as a TV, set top box, DVD player, or gaming system.
  • Page 9: Connection

    CONNECTION AUX IN Use an optical cable to connect TV OPTICAL OUT AUX IN Use a RCA cable to connect other device AUX OUT Use a 3.5mm audio cable to connect other device AUX IN...
  • Page 10: Specifications

    SPECIFICATIONS ELECTRONIC Nominal output power: Left channel Right channel Input sensibility 350mV ±50mV Nominal load impedance 8Ω Left channel 8Ω Right channel ≥2V Overload source moving force <1% Harmonic distortion (rate condition) 1KHz Frequency response 55HZ 20KHZ S/N(A weighted) FL、FR≥70dB ≥40dB Separation (normal working condition, 1KHz) SPEAKER...
  • Page 11: Troubleshooting

    TROUBLESHOOTING If any trouble is encountered, first refer to the chart below. If the problem still exists, please turn off the device and consult the local dealer or service station for repairing. When the device is attacked by electric shock (e.g. lightning or static), or improper operation, this unit may not work properly.
  • Page 12: Exclusions And Limitations

    Product. This Warranty is valid only in the United States, and only applies to products purchased and serviced in the United States. All replaced parts and products, and products on which a refund is made, become the property of ELEMENT.

Table of Contents

Save PDF