Preparations For Start; Top Panel Function - Element ESB204 Instruction Manual

TOP PANEL FUNCTION

TOP PANEL
6 7
1 2
TOP PANEL BUTTONS
POWER BUTTON
1
Press to turn Sound Bar on or off. The indicator light is orange in the
standby mode, and it will turn off when the system is on.
Note: If the channel has no input signal or any operation in 15 minutes,
the device will automatically go into the Standby mode.
VOL- BUTTON
2
BLUETOOTH
3
Bluetooth button. If the device is not in bluetooth mode, press this button
to force the device into bluetooth mode; if connected, it will disconnect
immediately and enter into the pairing mode when you press the button.
VOL+ BUTTON
4
SOURCE BUTTON
5
Select the input source. The active source Indicator LED will illuminate
or flash (flash only applies to bluetooth non-activate status).
INDICATOR
POWER: The power indicator is always on in the standby mode, and it will
6
turn off when the system is on.
AUX IN: AUX IN indicator, in aux input this light will illuminate.
7
LINE IN: LINE IN indicator, in line in input this light will illuminate.
8
OPTICAL: OPTICAL indicator, in optical input this light will illuminate.
9
: BLUETOOTH indicator, in bluetooth input this light is on if the device is
10
connected; if it is unconnected, the light will flash.
VOLUME INDICATORS:
Sound Bar volume levels. The volume has 32 level settings, when it's
maximum, these five indicators will light on together for a while; when it's
minimum, the AUX IN indicator will illuminate for a while. These indicators
will illuminate according to the volume levels.
9
8
10
3 4
7 to 11 these LEDs light as you adjust the

PREPARATIONS FOR START

11
5
6