Yamaha FJR1300A Owner's Manual page 34

INSTRUMENT AND CONTROL FUNCTIONS
3. While the selected item is flashing,
push the "RESET" button for at
least 2 seconds.
4. Push the menu switch "MENU" to
return to the setting mode menu.
3
Selecting the units
1. Use the select switch to highlight
"Unit".
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
2. Push the menu switch "MENU".
The unit setting display will be
shown and "km or mile" (for the
UK only) or "km/L or L/100km"
(except for the UK) will flash in the
display.
Unit
km or mile
km
km/L or L/100km
km/L
TIP
 For the UK: Continue with the fol-
lowing steps.
 Except for the UK: Skip steps 3–5.
3. Push the menu switch "MENU".
"km" or "mile" will flash in the dis-
play.
Unit
km or mile
km
km/L or L/100km
km/L
3-19
4. Use the select switch to select
"km" or "mile", and then push the
menu switch "MENU".
TIP
When "km" is selected, "L/100km" or
"km/L" can be set as the fuel con-
sumption units. To set the fuel con-
sumption units, proceed as follows. If
"mile" was selected, skip steps 5 and
6.
5. Use the select switch to select
"km/L or L/100km".
6. Push the menu switch "MENU",
use the select switch to select
"L/100km" or "km/L", and then
push the menu switch "MENU"
again.
7. Use the select
highlight " ", and then push the
menu switch "MENU" to return to
the setting mode menu.
switch to