Yamaha FJR1300A Owner's Manual page 28

INSTRUMENT AND CONTROL FUNCTIONS
Adjusting the grip warmer
This vehicle is equipped with grip
warmers, which can only be used
when the engine is running. There are 4
grip warmer settings.
3
Setting
Off
Low
Middle
High
To increase the grip warmer tempera-
ture, push the " " side of the select
switch. To decrease the grip warmer
temperature, push the "
select switch.
NOTICE
 Be sure to wear gloves when
using the grip warmers.
 If the ambient temperature is 20
°C (68 °F) or higher, do not set
the grip warmer to the high set-
ting.
 If the handlebar grip or throttle
grip becomes worn or dam-
aged, stop using the grip warm-
ers and replace the grips.
Selecting the information display
Display
1 2
GEAR
N
A.TEMP
C.TEMP
TIME TRIP
0:06
1. Information display
2. Display–1
3. Display–2
" side of the
4. Display–3
ECA17931 There are 3 information displays. The
selected information display can be
switched by pushing the select switch.
The following items are shown in the
information displays:
 an odometer display
 tripmeter displays
 a fuel reserve tripmeter display
GEAR
3
N
TRIP-1 km
5.0
4
TRIP-2 km
7.0
ODO km
20
GEAR
N
˚C RANGE km
25 11
˚C FUEL AVG km/L
Lo 12.3
CRNT FUEL km/L
12.3
3-13
 an estimated traveling range dis-
play
 an elapsed time display
 an ambient temperature display
 a coolant temperature display
 an average fuel consumption dis-
play
 an instantaneous fuel consump-
tion display
The items shown in each information
display can be selected.
To set or select the items shown, see
page 3-16.
Odometer display:
ODO
20
Tripmeter displays:
TRIP-1
5.0
TRIP-2
7.0
km
km
km