Yamaha FZ6-SAHG Owner's Manual page 57

Hide thumbs Also See for FZ6-SAHG:
Table of Contents

Advertisement

2. Place a container under the engine
to collect the used coolant.
3. Remove the radiator cap retaining
bolt, radiator cap retainer and radi-
ator cap.
WARNING
Never attempt to remove the radiator
cap when the engine is hot.
1. Radiator cap retaining bolt
2. Radiator cap
3. Radiator cap retainer
4. Remove the coolant reservoir cap.
PERIODIC MAINTENANCE AND MINOR REPAIR
EWA10380
1. Coolant reservoir cap
2. Coolant reservoir
5. Remove the coolant reservoir cov-
er and coolant reservoir by remov-
ing the bolts.
1. Coolant reservoir cover
2. Bolt
6. Drain the coolant from the coolant
reservoir by turning it upside down.
7. Install the coolant reservoir and its
8. Remove the coolant drain bolt to
1. Coolant drain bolt
9. After the coolant is completely
10. Install the coolant drain bolt, and
NOTE:
Check the washer for damage and re-
place it if necessary.
6-13
reservoir cover by placing them in
the original position, and then in-
stalling the bolts.
drain the cooling system.
drained, thoroughly flush the cool-
ing system with clean tap water.
then tighten it to the specified
torque.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents