Sub-Zero bi30uo Use & Care Manual page 11

OPERATION
Ice and Water Dispenser
INTERNAL DISPENSER
For models BI-42SID and BI-48SID, the internal dispenser
is designed to accommodate a 16-oz
containers may be used but may compromise the effective-
ness of the dispenser. Drops of water may collect in the
removable water grille located directly below the dispenser.
Refer to the illustration below.
FUNCTION
ICE Press and hold to dispense ice.
WATER Press and hold to dispense water.
For models with an internal water dispenser, the dispenser
is located inside the refrigerator on the left wall. Press a
glass against the dispenser to activate water flow. Water
flow will stop when the glass is pulled away. Refer to the
illustration below.
WATER
ICE
WATER
GRILLE
Internal ice/ water dispenser.
pint glass. Larger
(.5 L)
WATER DISPENSER
Internal water dispenser.
EXTERNAL DISPENSER
For large quantities of ice, a bulk ice dispenser is located
inside the refrigerator. Refer to the illustrations below.
Drops of water may collect in the removable water grille
located at the bottom of the glasswell. This is not a drain.
Do not pour water into the water grille.
FUNCTION
ICE Press and hold to dispense ice.
For metered ice, press and hold for 2 seconds.
Dispenser will meter and collect ice before
dispensing into the glass. If held longer, the cycle
repeats for more ice.
WATER Press and hold to dispense water.
LIGHT Press to cycle through lighting options; lights off,
lights on and control panel lights only.
Press and hold for 5 seconds to activate or deacti-
vate the dispenser lock. Lock indicator will be
illuminated when dispenser is locked.
BULK ICE Press and hold to dispense large quantities of ice.
ICE
WATER
LOCK
INDICATOR
LIGHT
WATER
GRILLE
External dispenser.
BULK ICE
Bulk ice dispenser.
|
subzero.com 11