D-Link DIB-360 User Manual page 23

Section 3 - Setup
Network: Wi-Fi
If Wi-Fi networks are available, you can activate Wi-Fi to connect your DIB-360 to your
local Wi-Fi networks and then to surf the Internet. To activate the Wi-Fi connection, please
remove the Ethernet cable from your device in advance and make sure your DIB-360
is within antenna range of the network's access point and the wireless access point is
running. On the Network screen, select Wi-Fi and click on CENTER to go to the Wi-Fi screen.
To Scan for Available Wi-Fi Networks Manually
Select Site Survey and press CENTER to start searching for available wireless networks.
To Connect to a Wi-Fi Network
On the search results of the available wireless networks screen, move the focus to the
network that you want to connect to and press CENTER to establish a connection to that
Wi-Fi access point. For secured networks, you will need to enter a wireless password.
You can check with the person who manages the Wi-Fi network to obtain the wireless
password. When your DIB-360 successfully connects to a Wi-Fi network, it will display a
message stating the connection is successful.
To Check Network Connection
When your DIB-360 successfully connects to a Wi-Fi network, go back to the Network
screen. Select Test Network and press CENTER to check if the network connection is
functioning properly.
D-Link DIB-360 User Manual 20