Dib-360; Remote Control - D-Link DIB-360 User Manual

Section 2 - Getting Started

Remote Control

You can use the remote control to control your DIB-360 and navigate
through your content. The basic functions of the remote control are
described below.
COMPONENT
DIRECTIONAL pad Press to navigate up/down/left/right on screen menus
CENTER button Press to confirm your selection and play media files
OPTION button Press to display additional functions
BACK button Press to return to the previous screen and Home Menu
HOME button Press to return to the Home Menu
QUICK button Reserved for content provider
Pairing the remote to the DIB-360
The DIB-360 and the remote control should be pre-paired during the manufacturing process. However, if there is no response from the DIB-360
when you press the remote control, please do the following to re-pair the remote control and the DIB-360.
Re-pair via the proximity method:
a. Make sure the remote is at a distance of about 5 cm from the DIB-360.
b. To trigger re-pairing, press and hold down the CENTER button for 15 seconds to start pairing.
D-Link DIB-360 User Manual
DIRECTIONAL pad
DESCRIPTION
OPTION button
QUICK button
6