Positioner Setting - Miraclebox 9 Twin HD PVR User Manual

3.2 Positioner Setting

l
Satellite : Select the satellite which you want to search for the
Service.
- Press the LEFT/RIGHT ARROW button to select the satellite.
- If you press the OK button, a complete satellite list will be
displayed.
- Select the wanted satellite name.
- If the desired satellite name is not listed then select User
Defined.
l
Tuner : Select tuner that you want to set (Tuner 1/ Tuner 2). If
you have set 'Loop-Through' in the menu(Installation-Dish
Setting-Tuner Connection), this menu(Tuner) will be automatically disabled.
l
Frequency : Select the satellite frequency you want to use to check for a signal.
l
Positioner : Select the positioner.
- None : (No Positioner)
- Using DiSEqC 1.2 :
Move : To move the dish, press LEFT/RIGHT button.
Fine Move : To move the dish in smaller steps, press the
LEFT/RIGHT ARROW button.
Step : Set to positioner moving steps as 1, 2, 3, 4
Positioner Command : To use various positioner commands,
press the OK button. Then, available positioner commands
will appear.
- Using USALS :
Move : To move the dish, press the LEFT/RIGHT button.
Fine Move : To move the dish in smaller steps,, press the
LEFT/RIGHT ARROW button.
Step : Set to positioner moving steps as 1, 2, 3, 4
Dish Longitude : Enter the longitude position of the
antenna using the NUMERIC buttons.
Dish Latitude : Enter the latitude using the NUMERIC
buttons.
Go To : Press the OK button to rotate the dish to the
selected antenna position.
l
Dish Setting : Press the OK button to move to Dish Setting menu directly.
l
Service Search : Press the OK button to move to Service Search menu directly.
47