Data Transfer - Miraclebox 9 Twin HD PVR User Manual

1.4 Data Transfer

When the data transfer task is in process, the Front USB slot is set to a default device slot. But, if no
USB device is connected on a front USB slot, then the Rear USB slot is set as a device to be used for the
data transfer process.
NOTE : If no USB device is connected on either two (Front & Rear) USB slots, then a
Menu item will not be available.
l
Transfer all System data to USB storage : If you want to
transfer and use BOTH of the current system parameters and
service data in the future, this menu will allow you to store all
data to your USB device. Press OK button to store all current
data to an external USB storage.
l
Transfer Service data to USB storage : If you want to transfer
and use ONLY the service data in the future, this menu allows
you to store current service data. Press the OK button to store
the current service data to your external USB storage. The
service data can also be viewed and edited on a PC with an
appropriate editor (DrEdit) for the file saved.
l
Data download from USB storage device : This menu allows you to download the saved data from
the external USB storage to your STB. Press OK button to download data.
40