General Overview & Introduction - AAD CUBII Owner's Manual

The original Cub proved to be a big success but we knew we could make it even better with
more features. We made all the controls easily accessible on top.
A second input channel was added to handle a microphone or guitar. Both channels have
3-band EQ. There is also a stereo auxiliary input for I-pod or backing tracks for practice.
FX send and return can be use on either or both channels. It can be stand mounted with our
proprietary accessory stand or tilted upwards on the ground for more projection.
DI, Line and tuner outputs on back.
The cub II comes with a padded gig bag and can operate on any AC voltage worldwide.
With 100 watts of power, you can practice or perform anywhere.
Available in red or black.
FEATURES
• Dual channel switchable high impedance/high gain input OR low impedance/low
gain stage.
• One stereo input for Drum machine or I-pod/MP3 player.
• 3 Band EQ designated for guitar.
• FX Send Return sockets with blend control.
• Tuner out.
• Pre-amp Output.
• Balanced Line Output with ground lift.
• Smart power sensing that allows amplifier to work on any AC voltage worldwide. Just
plug in, no switching required.
• Sophisticated amplifier protection circuitry
• Special "Soft-Clipping" 100watt Amplifier
• Ultra low noise pre amplifier circuit.
OVERVIEW OF THE CUB II
3