Starting Engine - Yamaha F75 Owner's Manual

Hide thumbs Also See for F75:
Table of Contents

Advertisement

1
1. Air vent screw
2.
Firmly connect the other end of the fuel
hose to the joint on the fuel tank.
2
1. Fuel joint
2. Fuel hose
3.
Wipe up any spilled gasoline immediately
with dry rags.
TIP:
Dispose of rags properly according to local
laws or regulations.
4.
Squeeze the primer pump, with the arrow
pointing up, until you feel it become firm.
During engine operation, place the tank
horizontally, otherwise fuel cannot be
drawn from the fuel tank.
ZMU07445
TIP:
1
EMU27494

Starting engine

EWM01600
Before starting the engine, make sure that
ZMU07455
the boat is tightly moored and that you can
steer clear of any obstructions. Be sure
there are no swimmers in the water near
you.
EMU27595
Electric start / prime start models
EWM01840
1. Arrow
2. Primer pump
When using the fuel tank on the boat, a fuel
valve may also be equipped on the boat.
Open the fuel valve.
Check the boat's manual for the position of
the fuel valve.
WARNING
WARNING
Failure to attached engine shut-off cord
could result in a runaway boat if opera-
tor is ejected. Attach the engine shut-off
cord to a secure place on your clothing,
or your arm or leg while operating. Do
not attach the cord to clothing that could
tear loose. Do not route the cord where
it could become entangled, preventing it
from functioning.
Operation
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F90

Table of Contents