Tail/Brake Light Bulb Replacement - Yamaha BIG BEAR PROFESSIONAL 400 YFM400FPT Owner's Manual

1. Storage box
1. Compartiment de rangement 2. Écrou (× 2)
1. Caja portaobjetos
1. Bulb holder
1. Fixation d'ampoule
1. Portabombillas
2. Nut (× 2)
2. Tuerca (× 2)
2. Bulb
2. Ampoule
2. Bombilla

Tail/brake light bulb replacement

1. Open the storage box. (See page 4-37.)
2. Remove the nuts together with the washers.
3. Remove the bulb holder (together with the
bulb) by turning it counterclockwise.
4. Remove the defective bulb from the bulb
holder by pushing it inward and turning it
counterclockwise.
5. Install a new bulb in the bulb holder by push-
ing it inward and turning it clockwise.
6. Install the bulb holder (together with the bulb)
by turning it clockwise.
7. Install the washers, and then install the nuts.
8. Close the storage box.
8-101
EBU09452