1. Tail/brake light bulb
3. Insert a new bulb into the socket, push it in,
and then turn it clockwise until it stops.
4. Install the lens by installing the screws.
NOTICE: Do not overtighten the screws,
otherwise the lens may break.
EBU28031
Replacing a turn signal light bulb
1. Remove the turn signal light lens by removing
the screw.
1. Screw
2. Remove the burnt-out bulb by pushing it in
3. Insert a new bulb into the socket, push it in,
4. Install the lens by installing the screw.
[ECB00701]
EBU28183
Replacing the license plate light bulb
If the license plate light bulb burns out, replace it as
follows.
1. Remove the license plate light body by remov-
8-42
and turning it counterclockwise.
and then turn it clockwise until it stops.
NOTICE: Do not overtighten the screw,
otherwise the lens may break.
ing the screw.
8
[ECB00871]