Removing And Installing Panels - Yamaha XMAX YP250RA Owner's Manual

Periodic maintenance and adjustment
Removing and installing pan-
els
The panels shown need to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time a panel needs to
be removed and installed.
1
ZAUM1022
1. Panel A
6
2. Panel B
1
ZAUM1021
1. Panel C
Panel A
To remove the panel
1. Open the front storage compart-
ment A. (See page 3-21.)
2. Remove the screw, and then pull
the panel off.
EAU18773
ZAUM1046
1. Panel A
2. Screw
To install the panel
2
Place the panel in the original position,
and then install the screw.
Panel B
To remove the panel
1. Open the front storage compart-
ment B. (See page 3-21.)
2. Remove the screw, and then pull
the panel off.
1
2
EAUM3340
ZAUM1047
1. Panel B
2. Screw
To install the panel
Place the panel in the original position,
and then install the screw.
6-7
1
2