Yamaha XMAX YP250RA Owner's Manual page 21

The electric tachometer allows the rid-
er to monitor the engine speed and
keep it within the ideal power range.
NOTICE
Do not operate the engine in the ta-
chometer high-rpm zone.
High-rpm zone: 8000 r/min and
above
Fuel meter
SELECT
6 7
5 8
9
4
1000 r/min
10
3
11
2
12
1
0 km/h
E
F
1 2
ZAUM1102
1. Fuel meter
2. Fuel level warning indicator "
3. Fuel reserve tripmeter
With the key in the "ON" position, the
fuel meter indicates the amount of fuel
in the fuel tank. The display segments
of the fuel meter disappear towards
"E" (Empty) as the fuel level decreases.
When the fuel level reaches the bottom
segment near "E", the bottom segment
will flash. Refuel as soon as possible.
Clock
To set the clock:
1. Push the "SELECT" button for 3
seconds, and the hour digits will
start flashing.
2. Use the "SELECT" button to set
the hours.
Instrument and control functions
ECAM1150
RESET
3
"
3. Push the "SELECT" button for 3
seconds, and the minute digits will
start flashing.
4. Use the "SELECT" button to set
the minutes.
5. Push the "SELECT" button for 3
seconds to complete setting the
clock.
Odometer and tripmeter display
2
1
TRIP
INFO
ZAUM1104
1. "TRIP/INFO" switch
2. Function display
The odometer and tripmeter display is
equipped with the following:
 a tripmeter (which shows the dis-
tance traveled since last set to ze-
ro)
 a time tripmeter (which shows the
elapsed riding time since last set
to zero)
 a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
 an oil change tripmeter (which
shows the distance traveled since
the last engine oil change)
 a V-belt replacement tripmeter
(which shows the distance trav-
eled since the last V-belt replace-
ment)
3-7
3