Crossing A Slope - Yamaha YFM50RY Owner's Manual

hill. Avoid sharp angles which could allow the ATV
to tip or roll over. Carefully choose your path and
1
ride no faster than you will be able to react to ob-
stacles which may appear.
2
EWB01620
WARNING
3
Always follow proper procedures for going
down hills as described in this Owner's Manu-
4
al.
Note: a special technique is required when
5
braking as you go down a hill.
G
Always check the terrain carefully before
6
you start down any hill.
G Shift your weight backward.
7
G Never go down a hill at high speed.
G Avoid going down a hill at an angle that
8
would cause the ATV to lean sharply to one
9
side. Go straight down the hill where possi-
ble.
10
11
OK

CROSSING A SLOPE

Traversing a sloping surface on your ATV requires
you to properly position your weight to maintain
proper balance. Be sure that you have learned the
basic riding skills on flat ground before attempting
to cross a sloping surface. Avoid slopes with slip-
pery surfaces or rough terrain that may upset your
balance.
As you travel across a slope, lean your body in the
uphill direction. It may be necessary to correct the
steering when riding on loose surfaces by pointing
the front wheels slightly uphill. When riding on
7-17