Advertisement
Reference
Section 3. Operation
Section 3. Operation
Turn on
Turn off
Satellite Status
3
-
1
-
1
To turn on the receiver, press the power buttons on
side for a few seconds until the
&
BLUE
Bluetooth LED indicators switch on.
1) To turn off the receiver, press the power switch
on side for a few seconds until
LED indicators switch off.
2) Auto power-off if Bluetooth is not connected to
and host devices within 10 minutes for power-
saving.
The receiver will look for satellites automatically
once power on and indicate the status by LED
status.
GREEN
GPS LED
BLUE
Bluetooth
Advertisement
