Replacing The Fuse; Removing A Wheel - Yamaha YFM50R Owner's Manual

that the frame is exposed to electrolyte or gas
expelled from the battery, the frame could suf-
fer structural and external damages.
EBU25242

Replacing the fuse

1
1. Fuse
2. Spare fuse
The fuse holder is located under the seat. (See
page 4-11.)
If the fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off all electrical
circuits.
2
ECB00640
CAUTION:
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.
2. Remove the blown fuse, and then install a
new fuse of the specified amperage.
Specified fuse:
5.0 A
EWB02171
WARNING
Always use a fuse of the specified rating, and
never use a substitute object in place of the
proper fuse. An improper fuse or a substitute
object can cause damage to the electrical sys-
tem, which could lead to a fire.
3. Turn the key to "ON" and turn on the electrical
circuits to check if the devices operate.
4. If the fuse immediately blows again, have a
Yamaha dealer check the electrical system.
EBU25650

Removing a wheel

1. Loosen the wheel nuts.
8-28
1
2
3
4
5
6
7
8
9
10
11